CSSP Solutions

The ArcticLink® and PolarPro® Solutions Platform’s programmable fabric customizable building blocks provide a compact, single-chip solution that:

• Reduces BOM costs
• Saves board space
• Eases system-level design trade-offs
• Improves the end product’s time-to-market and time-in-market

Storage
IDE/P-ATA Host Controller supports	All 1” and 1.8” IDE/P-ATA HDDs Data throughput of up to 33 MByte/sec with UDMA Lower processor overhead for ATA timing and polling operation
CE-ATA Host Controller supports	4-bit and 8-bit CE-ATA HDDs CE-ATA 1.1 compliant peripheral interface at speeds up to 52 MHz Hardware implementation for CMD-60 and CMD-61 to lower host processor overhead
NAND Flash Controller supports	Single Level Cell (SLC) NAND flash with 2-bit hardware ECC/EDC Hardware support for wear leveling and bad block management
Secure Digital (SD) Card Host Controller supports	Secure Digital 2.0 standard with support for Secure Digital High Capacity (SDHC) 1-bit and 4-bit operation at speeds of up to 52 MHz
Compact Flash (CF) Host Controller supports	8-bit and 16-bit Compact Flash interface Memory and I/O modes for CF card and peripherals True IDE mode for CF micro hard drives
Multimedia Card (MMC) Controller supports	MMC 4.1 standard for MMC and high capacity SIM card 1-bit, 4-bit, 8-bit operation with speeds up to 52 MHz
Memory Stick (MS) Controller supports	Memory Stick and Memory Stick Pro standards Theoretical maximum data transfer rate of 480 Mbps 4-bit, 8-bit and serial interface widths
Managed NAND Controller with Boot Capability supports	Elimination of the need for NOR Flash in the system Booting from any SD/MMC-based Managed NAND device with support for SDHC devices of 4 GBytes and above SD/MMC controller is SD 2.0 compliant with support for SDHC devices for Managed NAND densities of 4 GBytes and above Supports the latest eMMC standard Supports multiple SD/SDIO/MMC devices or cards on the same bus
Optical Drive Controller (ATAPI) supports	CD and DVD ROM connectivity (ATAPI) Enhanced support for simultaneous DVD ROM and hard disk drives Throughput of greater than 13 MByte/sec Off-loading the application processor from managing the overhead of ATA timing and polling operations

Network
Hi-Speed USB 2.0 Host Controller supports	Hi-speed USB 2.0 OTG with integrated high-speed PHY 12-signal ULPI interface available through programmable fabric 8 KByte SRAM on-chip buffer to improve data transfer performance Dedicated DMA controller to off-load CPU from heavy data transfer and manipulation
High-Speed SDIO Controller supports	High-speed SDIO host controller with clock frequency up to 52 MHz Compliance with the latest Secure Digital 2.0 standard SPI, 1-bit and 4-bit modes Rx/Tx FIFOs for higher performance and throughput DMA support for reducing processor bus utilization
MiniPCI for Ethernet, Wi-Fi/WiMAX Controller supports	Leveraging of low-cost PCI-based Wi-Fi modules Up to 264 MByte/sec PCI bus performance, zero wait states Master and target functions for 32-bit data at speeds of 33 and 66 MHz Full compliance to PCI specification 2.3, and Cardbus and Compact PCI compatible
SPI Controller supports	High-speed SPI master controller with clock frequency up to 52 MHz Low cost, low pin count wireless connectivity solution Simple driver architecture customizable to enhance Wi-Fi performance
Bluetooth 2.x + EDR High-Speed UART supports	High-speed UART supporting Bluetooth 2.x with up to 4 Mbit/sec data rate Configurable baud rate customized for different application requirements Configurable flow control and FIFO access
SDIO Client supports	SD v2.0 and SDIO v1.2 compliance with multifunction SDIO support SD 1 bit, SD 4 bit and SPI mode up to 50 MHz Hot insertion/removal, interrupt, Read Wait, Suspend, and Resume CRC7/CRC16
USB Hub supports	Hi-Speed USB upstream port with built-in Hi-Speed USB PHY Each downstream port supporting Full-Speed at 12 MByte/sec and Low-Speed at 1.5 Mbit/sec operation Customizable number of downstream ports Transaction Translator (TT) optimized for maximum bandwidth utilization

Video and Imaging
Visual Enhancement Engine Technology (VEE™) support	TV-quality visual experience in mobile devices through dynamic range control Greatly enhanced image and video quality even under low backlight or bright ambient conditions Dramatically improved battery life by reducing backlight
MDDI v1.2 Type 2 Client supports	Most recent MDDI client interface for forward and reverse data transmission that supports forward video, forward audio, reverse pointer device, and reverse keyboard device. MDDI register read/write access to internal registers, serial peripheral controllers, frame buffer and programmable fabric.
MIPI DSI with Built-in D-PHY supports	Display standard develop by the MIPI alliance; up to WVGA resolution Serial interface to reduce pin count, power and cost Lower noise and much improved reliability through hinge of clamshell, swivel and slider phones
X/Y Swap supports	X/Y Swap Operation Frame rate conversion for VGA, NTSC and PAL Power management for stopping all subsystem clocks and shutting down the SDRAM frame buffer Configuration from the host application processor via I2C-compatible bus
High-Definition LCD Controller supports	Configurable resolution up to 1024x768 Programmable display aspect ratio Configurable vertical and horizontal scan frequencies Maximum color depth of 24 bits per pixel Embedded SRAM/(Mobile) SDRAM/DDR-SDRAM controller for frame buffer

Intelligence
Direct Memory Access (DMA) supports	Fully customizable DMA controller Lower CPU utilization
Smart Programmable Integrated Data Aggregator (SPIDA) supports	Onboard intelligence that enables direct port-to-port data transfers, without involving the host CPU bus Significantly improved speed for large file transfer, enhancing user experience and increasing battery life Aggregation of multiple, independent data paths Interface-standard agnostic via multiple proven system blocks and programmable fabric Significantly simplified connections to multiple standard devices via one data pipe to host

Security and Custom Options
Content Protection for Recordable Media (CPRM) supports	C2 cipher algorithm implemented in hardware Working in conjunction with QuickLogic SD/SDIO or P-ATA host controllers Key stored securely in hardware Optimization for SD-Video performance
Serial ID supports	Secure numeric ID, as long as 256 bits can be implemented in the programmable fabric of any PolarPro or ArcticLink Solution Platform Unique number in each CSSP device controlled by a list of desired values provided by OEM/ODM
Advanced Encryption Standard (AES) supports	300Mbps full duplex throughput Hardware implementation giving significant performance advantage over software
Keyboard Controller supports	Keyboards with 16x8, 12x8 or other matrix Multiple, simultaneous keystrokes
PS2 supports	Mouse Touch Pad
PWM supports	LED control